Temperature controller with power-failure and high/low alarms, 0-10V analogue output, automatic timed control

Baomingxiang BMX-1910B environment control cabinet: beacon and siren alarms for power failure and high/low temperature, 0-10V analogue output for VFDs, switchable temperature or timer control, Beijing-time lighting schedule, four Auto/Off/Manual channels for fans, cooling pads, heating and lighting in a single house.

ModelBMX-1910B
AlarmsPower failure + high/low temperature, beacon and siren
Outputs0-10V analogue + relays
ControlTemperature or timer, switchable
VFDExternal drive supported
Our stores
Price and stock follow the store listings; bank transfer supported. For a configuration or an invoice, use the consultation on the right.

A general-purpose environment control cabinet: a Chinese-language LCD showing house temperature and setpoint, four run lights and four Auto / Off / Manual selectors on the panel, and a beacon-siren brought out separately on top. Fans, cooling pads, heaters and lighting in poultry houses, greenhouses or small pig houses can all be wired into it.

Four practical functions

Power-failure alarm: you find out when it happens, not when the power comes back. If the mains drops or a phase is lost, the beacon on top of the cabinet goes off — visible and audible outside the house, so nobody discovers at the next round that the fans have been stopped for hours.

Temperature or timer control, switchable: some loads should follow temperature (fans, heaters), others should follow the clock (lighting, timed air changes). Both modes work on the same cabinet, so lighting does not need a second timer.

VFD-ready output: the output can drive a variable-frequency drive, so fans are not limited to on and off — speed is staged against the temperature difference. House temperature travels in steps instead of dropping on start and climbing on stop.

Beijing-time lighting schedule: lights switch on the Beijing clock, so brooding and growing light programmes run without someone remembering to throw a breaker every day.

0-10V analogue output

Beyond relay contacts, the cabinet provides a 0-10V analogue output that connects directly to VFDs and proportional valves — equipment that sets speed or opening by voltage. Terminals are marked for polarity, so wiring on site needs no extra converter board.

More than one kind of alarm

Apart from power failure, the cabinet alarms when house temperature leaves the set band: above the upper limit or below the lower one, the screen shows it and the beacon sounds at the same time. High and low temperature alarms matter most at night, when nobody is awake to notice the temperature falling.

Enclosure and installation

Sheet-steel enclosure, white finish, wall mounted, with cable entries top and bottom. The meter, selectors and indicator lights are panel-mounted, so wiring is reachable by opening the door; the alarm beacon is brought out from the top of the cabinet and can sit in the corridor or by the door instead of on the box itself.

Where it fits

Best for a single house with up to four loads: two or three fans with a cooling pad, plus one channel of lighting or heating. For several houses, central control or multiple VFD channels, look at the sixteen-channel models. If you are unsure, send the house type and fan count and we will start with a configuration proposal: +86 199 3789 6911.

Related

Popular products

All products →
BMX-2070G stainless cabinet: app-controlled livestock thermostat BMX-2070G Livestock temperature control cabinets

BMX-2070G stainless cabinet: app-controlled livestock thermostat

BMX-2070G stainless-steel cabinet: 7-inch touchscreen, 16 equipment outputs plus 4 VFD channels, 4G SIM for app control, temperature, humidity, gas and negative pressure on one screen. Pre-wired at the factory, ready to run on site. For pig, poultry and duck houses and greenhouses.

Smart 4G temperature controller: phone-based zoned control cabinet for farm fans Livestock temperature control cabinets

Smart 4G temperature controller: phone-based zoned control cabinet for farm fans

Baomingxiang 4G zoned temperature cabinet: the whole site on a phone, four temperature probes to show whether a house is even, nine devices with custom names, voice-call and SMS alarms for over-temperature and power failure, a touchscreen on the door and four Auto/Off/Manual selectors for local control.

Temperature controller with power-failure and high/low alarms, 0-10V analogue output, automatic timed control Livestock temperature control cabinets

Temperature controller with power-failure and high/low alarms, 0-10V analogue output, automatic timed control

Baomingxiang BMX-1910B environment control cabinet: beacon and siren alarms for power failure and high/low temperature, 0-10V analogue output for VFDs, switchable temperature or timer control, Beijing-time lighting schedule, four Auto/Off/Manual channels for fans, cooling pads, heating and lighting in a single house.

BMX-2070G 4G environment controller with 7-inch touchscreen: 16 outputs, 4 VFD channels BMX-2070G Environmental controllers

BMX-2070G 4G environment controller with 7-inch touchscreen: 16 outputs, 4 VFD channels

Baomingxiang BMX-2070G environment controller: 7-inch touchscreen, 16 relay outputs plus 4 VFD channels, 4G remote access from a phone, positive and negative pressure ventilation with variable speed, over-temperature and power-failure alarms.

Send us your site details, get a configuration the same day

Just three numbers: what you raise, how many, and how many houses. We work out outputs and fan count.

微信二维码 Scan on WeChat · send your house type
Or call 199 3789 6911

Questions about sizing? Leave a note

T P D