BMX-2070G stainless cabinet: app-controlled livestock thermostat

MODEL / BMX-2070G

BMX-2070G stainless-steel cabinet: 7-inch touchscreen, 16 equipment outputs plus 4 VFD channels, 4G SIM for app control, temperature, humidity, gas and negative pressure on one screen. Pre-wired at the factory, ready to run on site. For pig, poultry and duck houses and greenhouses.

EnclosureStainless-steel cabinet
Outputs16 equipment + 4 VFD
Connectivity4G, mobile app
Our stores
Price and stock follow the store listings; bank transfer supported. For a configuration or an invoice, use the consultation on the right.

Overview

BMX-2070G stainless-steel cabinet version is the same controller delivered as a finished unit: the board, terminals and knobs wired and mounted inside a stainless-steel enclosure. The front panel carries a 7-inch colour touchscreen showing a house layout and the status of every channel, with 16 equipment outputs and 4 variable-frequency outputs. Fit a 4G SIM and the cabinet joins the mobile app for remote readings, parameter changes and switching.

The difference from buying a bare control board is the cabinet itself: terminals are numbered by channel, and every channel has its own pilot light and an Auto / Stop / Manual selector, so whoever wires it on site does not have to guess which cable belongs to which fan.

What is on the panel

  • 7-inch colour touchscreen: house layout plus channel status, with temperature, humidity, gas concentration and negative pressure on one screen;
  • 16 channel lights and 16 manual selectors: one green pilot light and one Auto / Stop / Manual selector per channel — no menu diving during maintenance;
  • 4 VFD outputs: fans run at a set speed rather than only full speed or off;
  • Stainless-steel enclosure: brushed finish, resistant to wash-down and humidity, suited to houses that are cleaned and disinfected regularly;
  • Lockable door and safety markings: the door can be locked to keep non-electricians out.

What the phone can do

With a 4G SIM inserted, the app home screen is the live state of this cabinet: temperature, humidity, gas concentration and negative pressure across the top, then all 16 equipment channels and 4 VFD channels listed below. Each channel can be renamed the way your farm calls it (House 1, Upper fan 3, Pit, Upper 6 and so on), switched remotely, re-parameterised, or checked against the alarm log.

It does not rely on farm broadband — the 4G card carries the traffic, so older houses without a network can still use it. From outside the farm or on the road, you can see what the house is doing right now.

Why buy the complete cabinet

When a control cabinet fails, most of the time the fault is not in the controller but in the wiring: a wrong wire number, a loose terminal, a probe connected backwards. We wire and power-test every channel before it leaves the workshop, so on site only three things remain — incoming power, probes, fans.

When several houses are fitted out at once, the cabinet numbers, terminal numbers and wiring diagram belong to one set: house and channel always match, and later fan replacements or extra probes can be traced from a single drawing.

Specifications

ItemSpecification
BrandBaomingxiang
ModelBMX-2070G (stainless-steel cabinet)
EnclosureStainless steel, brushed
Display7-inch colour touchscreen
Equipment outputs16 channels
VFD outputs4 channels, variable speed
InputsTemperature, humidity, gas concentration, negative pressure
Connectivity4G SIM, remote access via mobile app
Local controlTouchscreen plus per-channel Auto / Stop / Manual selectors
AlarmsHigh/low temperature and power failure (sound and light plus app push)
MountingWall mounted
OriginZhengzhou, Henan, China
CustomisationChannel count, VFD channels and sensors to order

Where it is used

Zoned temperature and ventilation control in pig, broiler and duck houses; constant temperature and air exchange in vegetable and mushroom greenhouses; replacing old cabinets during retrofits — sized to your fan count and channels, with cabinet size and cable exits adjustable.

Configuration note: the number of VFD and output channels and the sensor set are chosen against the equipment on site. Please provide sensor model and signal type before wiring; for multi-house monitoring, an additional networked option is available — ask our team.

Service and support

Remote commissioning is available nationwide; network setup, parameters and wiring questions can be handled by phone or WeChat. Before ordering, tell us your fan count, VFD channels and site voltage and we will configure the cabinet to drawing. Phone +86 199 3789 6911. For bulk orders, configuration or invoicing, please contact us.

Buy on Taobao: BMX-2070G stainless-steel cabinet

Related

Popular products

All products →

Send us your site details, get a configuration the same day

Just three numbers: what you raise, how many, and how many houses. We work out outputs and fan count.

微信二维码 Scan on WeChat · send your house type
Or call 199 3789 6911

Questions about sizing? Leave a note

T P D